King Post Retaining Wall
Call 01158 951 120 or email [email protected]
Call 01158 951 120 or email [email protected]
The main product dimensions of the prestressed concrete panel range can be found below.
There are four standard width options and three height options, however non-standard heights can be manufactured from 500mm to 1500mm.
Prestressed panels are manufactured to order, enabling panel length to be cast to suit steel centres.
We can also supply you with product data sheets and .dwg flies for all our precast products, which are available on request.
Width Options (mm) | Length Options (mm) | Height Options (mm) | Unit Weight (kg) |
---|---|---|---|
100 | 1000 - 6500 | 1000, 1200 & 1500 | Varies |
150 | 1000 - 7000 | 1000, 1200 & 1500 | Varies |
180 | 1000 - 7000 | 1000, 1200 & 1500 | Varies |
280 | 1000 - 7000 | 1000, 1200 & 1500 | Varies |
A king post retaining wall, is a versatile retaining wall system, which can be used to retain a wide variety of materials. Installation of the concrete panels between the steel columns is quick and easy, the panels can either be positioned into the web of a steel column or attached to the outside face, using bolts and steel plates provided. The panels require a steel column at each end to attach to, ideal if using in portal frame building. The panels sit directly on top of pad foundations, so no additional support is required under the panels.
The size, weight and type of universal beam or universal column used in a king post retaining wall will vary. This will be determined by the density of the retained material and any additional surcharge that may be applied to the wall. There are three main options for the steel foundation design, auger, mass concrete or base plate to bolt the steel to pad foundations.
Once installed, the horizontal and vertical joints between the prestressed panels can be sealed, enabling these products to be used for the storage of liquids. Concrete panels are manufactured under factory control, have been designed to relevant British (BS) standards and are CE marked.
Below is a table outlining the characteristics of the concrete panels. Here you can find information on concrete strength, material density and surcharge capacity. If you require any further details please contact us and one of our product experts will be happy to provide more information. You should consult a structural engineer to confirm the steels required to support the panels.
* These are the maximum values that can be achieved with concrete panels, this will vary depending on the panel thickness & panel length. Concrete panel finish is class A to the front face and hand trowel finish to the back face.
The lifting & fixing systems of our precast products have been designed for; speed of installation, ease of use and with the safety of the installer in mind.
Steel plate, bolt & washer for external fixing to columns.
Whilst our precast products are straight forward to install, we do offer a full precast installation service. Speak to the team today for a free installation quotation for your project.
Call 01158 951 120 or email [email protected]
We deliver on an articulated vehicle, for you to offload with your machinery.
We deliver, offload and place the units for you – using a crane vehicle or moffett (truck mounted forklift).
We provide you with a full turn-key solution; design, supply & installation (including associated groundworks).
We provide a full design, construction and precast concrete installation service for all of our products, enabling us to offer turnkey solutions.
Our dedicated team of structural engineers, groundworkers & precast installers have experience of delivering a wide range of construction projects and operate nationwide.