- Quick & Simple To Install – Dramatically reduce construction time and save money by installing panels yourself.
- Built To Last – Produced in a factory controlled environment, ensuring your panels are up to the job.
- Store Corrosives – Construction requires no steel making them the ideal panels for storing corrosives such as slurry.
Construction doesn’t require the use of a steel framework, making these panels the ideal solution for storing corrosives such as slurry stores.
Cantilever Retaining Wall Panel PRODUCT DIMENSIONS
The vertical panels are available in three widths; 1000mm, 1200mm and 1500mm. The wall heights can be up to 5000mm (excluding embedment depth) – the height of the wall will dictate the thickness of the panel which is required.
James Boulton – Rase Steels
James Boulton, Partner.
Alan Bowes, Managing Director. BOWSAL Construction Ltd.
Alan Bowes, Managing Director.
BOWSAL Construction Ltd.
The panels can be manufactured to withstand loads from one, or two sides depending on the application.
The cantilever panels are installed by digging a foundation trench, which receives a 100mm concrete base for setting out of the steel cradles, which support the bottom of the panels ready for levelling. Once the panels are positioned and supported with props, the panels are then tied into the reinforcement for the foundation slab before the concrete is poured to secure the panels. A concrete floor slab can then be poured providing a neat floor to wall joint.