The main product dimensions, unit weights and sizes available in the Agri L retaining wall range can be found below.
We can also supply you with product data sheets and .dwg files for all our precast products, which are available on request.
.ifc BIM object files are also available for some of our precast products, please get in touch to find out more.
| Height (mm) |
Length (mm) |
Width (mm) |
Unit Weight (kg) |
| 1390 |
5000 |
1050 |
3900 |
| 1640 |
5000 |
1050 |
4380 |
| 1890 |
5000 |
1350 |
5440 |
| 2140 |
5000 |
1350 |
5900 |
| 2640 |
4000 |
1800 |
6680 |
| 3160 |
2500 |
2000 |
4975 |
| 4220 |
2000 |
2500 |
7160 |
The Agri L Retaining wall is designed to meet the high demands of the Agricultural, Anaerobic Digestion and Biogas industries. Installation of the precast units is exceptionally fast, up to 100m per day. Unlike our other precast retaining wall solutions, the modular units do not require fixing once in position.
Corner units are also available for all heights, enabling you to construct silage clamps with ease. Joints between the precast elements can be sealed, enabling these products to be used for the storage of silage.
Wall units are manufactured under factory control, have been designed to relevant British (BS) & Eurocode (EN) standards and are CE marked.
Below is a table outlining the characteristics of the Agri L retaining wall. Here you can find information on concrete strength, material density and surcharge capacity. If you require any further details please contact us and one of our product experts will be happy to provide more information.
Compressive strength of concrete after 28 days of curing.
Maximum material density of retained material, measured in kN/m³
Maximum surcharge capacity of precast element, measured in kN/m²
Number of years precast element has been designed for.
Connection
Groove to groove connection, with positioning bar to interlock.
Edge Detail
Chamfered edges & rounded tops reduce damage to silage clamp sheets.
Smooth mould finish Type A to precast element, defined in British Standards.
Number of minutes precast element would provide fire resistance.
Minimum cover to steel reinforcement in precast element, measured in mm.
Typical manufacturing tolerances & dimensional variations +/- in mm.
A Type1 foundation can be used, if ground bearing capacity allows.
Single Load - Precast element is suitable for retaining material on toe side only.
We offer a full precast installation service for the Agri range of retaining walls. Speak to the team today for a free installation quotation for your project.
Lifting Equipment
Precast Units Installed with HIAB & Hydraulic Grab
Offload & Handling
Installation/Fixings
No additional fixings required
