Get a FREE quotation or advice
- Retaining Wall Heights 3m to 4m
- Square, Rectangular or Circular Options
- BS 8007 Compliant
- Above or Below Ground Construction
- Installation Service Available
Precast Concrete Tanks
Discover the key features of this product using the interactive 3D product viewer.
Use the side control panel to navigate your way around our products.
Our animated 3D renders enable you to explore our products in a unique & informative way.
Delivery & Installation Options
We deliver on an articulated vehicle, for you to offload with your machinery.
We deliver, offload and place the units for you – using a crane vehicle or moffett (truck mounted forklift).
We provide you with a full turn-key solution; design, supply & installation (including associated groundworks).
Construct square, rectangular or circular tanks using our precast concrete tanks walling system. Our tanks are suitable for storing clean and contaminated liquids, up to 4m high; this system is BS 8007 compliant.
The tanks can be constructed above or below ground, making them less obtrusive to their surroundings. Installation of the precast wall elements is fast, safe and efficient. Units are placed onto a reinforced concrete foundation and shimmed to level. The buttresses on the back of the wall enable the units to free-stand during installation, additional propping may not be required, depending on site conditions. Reinforcement bars are inserted through precast holes in the unit and tied into the floor reinforcement before pouring the floor slab. An outer reinforced concrete beam is then cast to further secure and seal the base joint.
The units interlock to ensure good alignment and a Hydrotite water-stop creates an effective seal in the vertical joints. Once installed the units are bolted together to create a compression joint. Thanks to the unique tongue and groove system the wall panels can be installed on a radius to create circular tanks, the 1m long sections enable tanks of any diameter, length or width to be formed.
Wall units are manufactured under factory control, have been designed to relevant British (BS) standards and are CE marked.
Below is a table outlining the characteristics of the precast concrete tanks. Here you can find information on concrete strength, material density and surcharge capacity. If you require any further details please contact us and one of our product experts will be happy to provide more information.
The main product dimensions, unit weights and sizes available in the precast concrete tanks range can be found below.
We can also supply you with product data sheets and .dwg flies for all our precast products, which are available on request.
.ifc BIM object files are also available for some of our precast products, please get in touch to find out more.
Unit Weight (kg)
Unit Weight (kg)
The lifting & fixing systems of our precast products have been designed for; speed of installation, ease of use and with the safety of the installer in mind.
1 x M30 Swivel Lifting Eye Ring + off-load spreader beam.
Offload & Handling
Hydrotite water-stop + bolts, nuts & washers for joint sealing.
Whilst our precast products are straight forward to install, we do offer a full precast installation service. Speak to the team today for a free installation quotation for your project.
Design & Installation
We provide a full design, construction and precast concrete installation service for all of our products, enabling us to offer turnkey solutions.
Our dedicated team of structural engineers, groundworkers & precast installers have experience of delivering a wide range of construction projects and operate nationwide.